How To Install A Printer On Windows Vista

Z7_3054ICK0KGTE30AQO5O3KA30N0

HP Printers - Installing and Configuring an Alternate Driver in Windows Vista

Introduction

An alternate compatible print driver solution for your HP product is included with the Windows Vista Operating system and is already on your computer. There is no need to download anything.

Use this document to identify the print driver that is compatible with your HP product and to install and configure it on the computer. This print driver makes it possible to use the basic functions for the product.

There is not a full-feature Windows Vista print driver solution available.

Installing and configuring a compatible driver

Follow the steps below to install and configure the print driver that is compatible with your HP product.

Step one: Determine the appropriate compatible driver

Use the following list to find the print driver that is compatible with your HP product.

Product	Alternate driver
Deskjet 3320, 3325, 3420, and 3520	Deskjet 3600
Photosmart 7600 series	Deskjet 5600
Deskjet 5850	Deskjet 5600
Photosmart 130 and 230	Photosmart 330
Photosmart 145 and 245	Photosmart 330
Photosmart 7350 and 7550	Deskjet 5550
Deskjet 6122 and 6127	Deskjet 990c
Deskjet 3816 and 3820	Deskjet 970cse
Deskjet 656	Deskjet 660c

Step two: Install the driver

Install the compatible print driver on the computer.

Make sure that the USB cable is not connected to the HP product.
From the Windows taskbar, click the Windows icon (), type control printers in the Start Search box, and then press Enter. The Printers window appears.
Click Add a printer and then click Add a local printer.
Click the Use an existing port check box.
In the Use an existing port drop-down list, select LPT1: (Printer Port) and then click Next.
Under Manufacturer on the Install the printer driver dialog box, select HP.
Under Printers, select the appropriate alternate print driver for the HP product and then click Next.
In the Printer name text box, type the HP product name and then click Next. The print driver starts to install.

note:
The name of the alternate print driver appears as the default name. The name can be changed to the name of the HP product, if desired.
After a message appears on the computer that the product was added successfully, connect the USB cable to the product and to the computer.
On the Found New Hardware screen, click Cancel.

note:
If multiple pop-up windows appear, click Cancel on each window.

Step three: Configure the driver

Configure the installed print driver.

In the Printers window, right-click the name of the HP product and then click Properties. The Properties dialog box appears.
Click the Ports tab.

Change the port from LPT1 to USB or DOT4, as indicated in the following table.

note:
If there is more than one USB/DOT4 port available, choose the USB/DOT4 port with the highest port number, because this port is usually assigned to the last connected and detected USB print device. To adjust the width of the ports row in the Properties dialog box to see the full port name, put the cursor over the vertical line between Port and Description, click and hold the mouse button, and then move the mouse to the right until the port name is visible.

Product	USB port	DOT 4 port
Deskjet 3320, 3325, 3420, and 3520	Yes	No
Photosmart 7660	Yes	No
Deskjet 5850	Yes	No
Photosmart 130 and 230	No	Yes
Photosmart 145 and 245	Yes	No
Photosmart 7350 and 7550	No	Yes
Deskjet 6122 and 6127	Yes	No
Deskjet 3816 and 3820	Yes	No
Deskjet 656	Yes	No

Click Apply.

Step four: Print a test page

In the Properties dialog box, click the General tab.
Click Print Test Page.